The online automatic screw machine is equipped with a turntable and a manipulator, which can realize multi-station synchronous operation. All the screws on the product can be locked at the same time. The locking time is about 3 seconds at a time. The worker only puts the product into the fixture on the machine. After locking, the robot will automatically take it out and put it into the conveyor belt.
Production line requirements: The special type of the assembly line is in the middle link. Both the product needs to enter the assembly line conveyor belt before locking the screws and after screwing the screws. Placed beside the conveyor belt:
Online lock screw machine
The requirements for the product are as follows
The product should be easy to place: the online automatic screw machine can realize the simultaneous operation of placing the product, screwing the screw, and the robot to take the product. The time for screwing and the robot to pick and place the product is usually less than 2 seconds, which requires employees to put the product in Within 2 seconds, if the product is placed for too long, the equipment will not be able to play its due performance.
The product cannot be too heavy: Since the process of picking and placing the product is performed by a robot, it is recommended that the product weight should not exceed 2KG.
The product has fragile attachments: If the product has fragile attachments, it is recommended to assemble after screwing.